Products
VRW TYPE
VRW 5/350 G with pressure gauges
VRW drawing
Capacity : up to 1000㎥/h
VRW type
- Vertical non self-priming centrifugal pump with flexible spacer coupling
The pump is in-line design with suction and delivery flange same size and in same level. The direction of the inspection opening can be choosen by every 30°
Technical Data
| Technical Information | |
|---|---|
| Capacity | up to 1000㎥/h |
| Head | up to 14bar |
| Nominal Diameter | DN 125 – DN 300 |
| Materials | |||
|---|---|---|---|
| Casing | Cast Iron GG-25 | Bronze G-CuSn10 | Aluminium Bronze G-CuAl10Ni |
| Impeller | Bronze G-CuSn10 | Aluminium Bronze G-CuAl10Ni | Duplex Stainless Steel 1.4468 |
| Shaft | Stainless Steel 1.4404 | Duplex Stainless Steel 1.4462 | |
| Shaft Sealing | Mechanical Seal | Stuffing box packing | |
Advantage
- Two rolling contact bearings, grease lubricated, not in contact with the liquid
- Flexible spacer coupling
- Maintenance without removing e-motoror pipes
- Stiff and vibration damping cast iron design for motor support and bearing stool
- Several options for materials, shaft sealing and self-priming systems
VNF type
VNF 5/350 G with pressure gauges
VNF drawing
Capacity : up to 1000㎥/h
VNF type
- Vertical non self-priming centrifugal pump with flexible spacer coupling
The pump is in axial inlet design with suction and delivery flange same size. The direction of the inspection opening can be choosen by every 30°
Technical Data
| Technical Information | |
|---|---|
| Capacity | up to 1000㎥/h |
| Head | up to 14bar |
| Nominal Diameter | DN 80 – DN 300 |
| Materials | |||
|---|---|---|---|
| Casing | Cast Iron GG-25 | Bronze G-CuSn10 | Aluminium Bronze G-CuAl10Ni |
| Impeller | Bronze G-CuSn10 | Aluminium Bronze G-CuAl10Ni | Duplex Stainless Steel 1.4468 |
| Shaft | Stainless Steel 1.4404 | Duplex Stainless Steel 1.4462 | |
| Shaft Sealing | Mechanical Seal | Stuffing box packing | |
Advantage
- Two rolling contact bearings, grease or lifetime lubricated, not in contact with the liquid
- Flexible coupling
- Low height
- Maintenance without removing e-motoror pipes
- Stiff and vibration damping cast iron design for motor support and bearing stool
- Several options for materials and priming systems
STN type
STN 80 G with pressure gauges
STN drawing
Capacity : up to 650㎥/h
STN type
- Horizontal non self-priming centrifugal pump with flexible coupling
Technical Data
| Technical Information | |
|---|---|
| Capacity | up to 650㎥/h |
| Head | up to 9bar |
| Nominal Diameter | DN 40 – DN 250 |
| Materials | |||
|---|---|---|---|
| Casing | Cast Iron GG-25 | Bronze G-CuSn10 | Aluminium Bronze G-CuAl10Ni |
| Impeller | Bronze G-CuSn10 | Aluminium Bronze G-CuAl10Ni | Duplex Stainless Steel 1.4468 |
| Shaft | Stainless Steel 1.4404 | Duplex Stainless Steel 1.4462 | |
| Shaft Sealing | Mechanical Seal | Stuffing box packing | |
Advantage
- Two rolling contact bearings, grease or lifetime lubricated, not in contact with the liquid
- Flexible coupling
- Several options for materials and priming systems
SFN type
SFN with pressure gauges
Capacity : up to 650㎥/h
SFN type
- The SFN type is a centrifugal pump for bulkhead mounting
Technical data and materials are same as for STN type
Technical Data
| Technical Information | |
|---|---|
| Capacity | up to 650㎥/h |
| Head | up to 9bar |
| Nominal Diameter | DN 40 – DN 250 |
| Materials | |||
|---|---|---|---|
| Casing | Cast Iron GG-25 | Bronze G-CuSn10 | Aluminium Bronze G-CuAl10Ni |
| Impeller | Bronze G-CuSn10 | Aluminium Bronze G-CuAl10Ni | Duplex Stainless Steel 1.4468 |
| Shaft | Stainless Steel 1.4404 | Duplex Stainless Steel 1.4462 | |
| Shaft Sealing | Mechanical Seal | Stuffing box packing | |
Advantage
- Two rolling contact bearings, grease or lifetime lubricated, not in contact with the liquid
- Flexible coupling
- Several options for materials and priming systems